ORCHID TECHNOLOGY PCNET (REV. C1) NIC Type Unidentified Network Transfer Rate Unidentified Data Bus 8-bit ISA Topology Linear Bus Wiring Type RG-11A/U 75ohm coaxial RG-59B/U 75ohm coaxial Boot ROM Not available [Image] CONNECTIONS Function Label RG-11A/U or RG-59B/U 75ohm coaxial CN1 connector USER CONFIGURABLE SETTINGS Setting Label Position » Factory configured - do not alter SW2/1 Off » Factory configured - do not alter SW2/2 Off » Factory configured - do not alter SW2/3 Off » Factory configured - do not alter SW2/4 Off » Factory configured - do not alter SW2/5 Off » Factory configured - do not alter SW2/6 Off » Factory configured - do not alter SW2/7 Off » Factory configured - do not alter SW2/8 Off INTERRUPT Setting JP1 IRQ2 Pins 9 & 10 closed IRQ3 Pins 7 & 8 closed IRQ4 Pins 4 & 7 closed IRQ5 Pins 6 & 7 closed Note:The settings for IRQ4 and IRQ5 may only be set with a wire-wrapping tool. DMA CHANNEL Setting JP1 DMA1 Pins 11 & 12, 13 & 14 closed DMA3 Pins 15 & 16, 17 & 18 closed NODE ADDRESS Setting SW1/1 SW1/2 SW1/3 SW1/4 SW1/5 SW1/6 SW1/7 SW1/8 1 Off Off Off Off Off Off Off On 2 Off Off Off Off Off Off On Off 3 Off Off Off Off Off Off On On 4 Off Off Off Off Off On Off Off 5 Off Off Off Off Off On Off On 251 On On On On On Off On On 252 On On On On On On Off Off 253 On On On On On On Off On 254 On On On On On On On Off 255 On On On On On On On On Note: A total of 255 node address settings are available. The switches are a binary representation of the decimal node addresses. SW1/1 is the Most Significant Bit and switch SW1/8 is the Least Significant Bit. The switches have the following decimal values: SW1/1=128, SW1/2=64, SW1/3=32, SW1/4=16, SW1/5=8, SW1/6=4, SW1/7=2, SW1/8=1. Turn off the switches and add the values of the switches that are off to obtain the correct node ID. (Off=0, On=1) Node address 0 is reserved and should not be used.