DANPEX CORPORATION ET-102 Card Type Transceiver NIC Type Ethernet Data Bus AUI via DB-15 port Network Transfer Rate 10Mbps Topology Linear Bus Wiring Type RG-58A/U 50ohm coaxial [Image] CONNECTIONS Function Label Function Label AUI via DB-15 port CN1 RG-58A/U 50ohm coaxial CN2 connector USER CONFIGURABLE SETTINGS Setting Label Position » SQE test disabled JP1 Pins 1 & 2 closed SQE test enabled JP1 Pins 2 & 3 closed » Factory configured - do not alter JP2 Pins 1 & 2 closed DIAGNOSTIC LED(S) LED Color Status Condition PWR Unidentified On Power is on PWR Unidentified Off Power is off TX Unidentified Blinking Transceiver is transmitting to network TX Unidentified Off Transceiver is not transmitting to network RX Unidentified Blinking Transceiver is receiving from network RX Unidentified Off Transceiver is not receiving from network CD Unidentified Blinking Collision has been detected CD Unidentified Off Collision has not been detected SQE Unidentified On SQE test is enabled SQE Unidentified Off SQE test is disabled