NETWORTH, INC.

ISA HUBEXPANDER

NIC Type          Ethernet
Transfer Rate     10Mbps
Data Bus          8/16-bit ISA
Topology          Star
Wiring Type       Unshielded twisted pair (located on external box)
Boot ROM          Not available

[Image]

                                CONNECTIONS

                Purpose                             Location

     Daisy-chain cable from another                    S1
            board connector

     Physical Media Extender board                     S2
               connector

    Daisy-chain cable for this board                   S3
               connector

  Proprietary Telco 50-pin connector                   S4

       EXPANSION CARD CONFIGURATION

       Select                 W2

       HubCard        pins 1 & 2 closed

    HubExpander 1     pins 3 & 4 closed

    HubExpander 2     pins 5 & 6 closed

    HubExpander 3     pins 7 & 8 closed

  FACTORY CONFIGURED - DO NOT ALTER

      Jumper            Position

        W1               Closed

                         MISCELLANEOUS NOTES

  Terminator pack must be placed on last hubexpander card in chain.