ASANTE TECHNOLOGIES, INC.

MACCON+ 30I ETHERNET CARD

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      32-bit SE30 PDS slot
Topology      Linear Bus/Star
Wiring Type   Unshielded twisted pair

              AUI Transceiver via DB-15 port

              RG-58A/U 50ohm coaxial
Boot ROM      Not available

[Image]

             CONNECTIONS

     Purpose           Function

  Connector card          CN1

       NPU          Motorola 68882

  SHARED RAM SIZE CONFIGURATION

      Size              J2

      16KB              Off

      64KB              On

                 BOOT ROM TYPE

      Type            J1              J3

     16 pin           N/A           Closed

  28 pin 27128       Open            Open

  28 pin 27256      Closed           Open

[Image]

                       CONNECTIONS

           Purpose                     Location

  Controller card connector              CN2

                        CABLE TYPE SELECTION

            Cable Type                           SW1

      RG-58A/U 50ohm coaxial                     Off

  AUI Transceiver via DB-15 port                 On

                             DIAGNOSTIC LED(S)

         LED                   Status                   Condition

         LED1                    On             Network activity detected

         LED1                   Off                Network activity not
                                                        detected

[Image]

                       CONNECTIONS

           Purpose                     Function

  Controller card connector              CN3

                           CABLE TYPE SELECTION

              Cable Type                               SW2

     Unshielded twisted pair, link                 position 1
                enabled

     Unshielded twisted pair, link                 position 2
               disabled

    AUI Transceiver via DB-15 port                 position 3

                             DIAGNOSTIC LED(S)

         LED                   Status                   Condition

         LED2                    On             Network activity detected

         LED2                   Off                Network activity not
                                                        detected

         LED3                    On                  Link status OK

         LED3                   Off                Link status broken