MACNET SE470E (VER. A) NIC Type: Ethernet Transfer Rate: 10Mbps Data Bus: 32-bit SE Processor direct slot (Apple) Topology: Linear Bus Star Wiring Type AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial Shielded/Unshielded twisted pair Boot ROM Available [Image] CABLE TYPE Type SW1 AUI transceiver via DB-15 port Position 2 RG-58A/U 50ohm coaxial Position 3 Shielded/unshielded twisted pair Position 1 ON-BOARD RAM Setting JP1 » 64KB Closed 16KB Open Note:The location of JP1 is not specified in manufacturer’s documentation. BOOT ROM Setting JP2 JP3 » 27128 ROM chip installed Closed N/A 27256 ROM chip installed Open N/A » 74LS471 ROM chip installed N/A Closed PJ2 ROM chip installed N/A Open Note:The locations of JP2 and JP3 are not specified in manufacturer’s documentation. DIAGNOSTIC LEDS LED Color Status Condition LED 1 Green On Data is being transmitted or received LED 1 Green Off Data is not being transmitted or received LED 2 Red On Twisted pair network connection is good LED 2 Red Off Twisted pair network connection is broken