UNIDENTIFIED

A104-ENET

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      Proprietary module
Topology      Linear bus
Wiring Type   AUI transceiver via DB-15 port

              AUI transceiver via 15-pin interface
Boot ROM      Available

[Image]

                      SOFTWARE/HARDWARE CONFIGURATION

         Setting               Boot ROM                    JP1

  »        Hardware            Disabled             Pins 2 & 3 closed

           Software             Enabled             Pins 1 & 2 closed

                             DIAGNOSTIC LED(S)

     Color              Status                      Condition

     Green               Off                    Data is not being
                                              transmitted/received

     Green             Blinking                   Data is being
                                              transmitted/received

    Yellow               Off                No collision is occurring

    Yellow             Blinking              Collision is occurring

       Note: The location of the green and yellow LED's relative to each
       other is unspecified in manufacturer documentation.

                          CONNECTIONS

            Purpose                        Location

   Diagnostic LED connector 1                 J1

   Diagnostic LED connector 2                 J2

  Stackthrough bus connector 1                P1

  Stackthrough bus connector 2                P2