ADDTRON TECHNOLOGY COMPANY, LTD.

AE-220TP

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      16-bit ISA
Topology      Linear bus
Wiring Type   Unshielded twisted pair
Boot ROM      Available

[Image]

                             CABLE TYPE

               Type                            JP1A-H

     Unshielded twisted pair              Pins 1 & 2 closed

  DIX transceiver via DB-15 port          Pins 2 & 3 closed

                              LINK INTEGRITY

                Function                                JP2

  »         Link intergity enabled               Pins 1 & 2 closed

           Link integrity disabled               Pins 2 & 3 closed

  Note: If card is used in a pre-10BaseT cabling network, disable the
  link integrity function.

              SEGMENT LENGTH

       Length                JP3

     185 meters       Pins 2 & 3 closed

     300 meters       Pins 1 & 2 closed

                         WAIT STATE CONFIGURATION

               Bus Speed                               JP4

                6MHz - 8MHz                            Open

  »                >8MHz                              Closed

                 ROM SIZE

        Size                 JP5

        16KB          Pins 2 & 3 closed

        32KB          Pins 1 & 2 closed

                            INTERRUPT SETTINGS

  IRQ     JP6A     JP6B      JP6C      JP6D     JP6E      JP6F     JP6G

  2/9    Closed    Open      Open      Open     Open      Open     Open

   3      Open     Closed    Open      Open     Open      Open     Open

   4      Open     Open     Closed     Open     Open      Open     Open

   5      Open     Open      Open     Closed    Open      Open     Open

  10      Open     Open      Open      Open     Closed    Open     Open

  11      Open     Open      Open      Open     Open     Closed    Open

  12      Open     Open      Open      Open     Open      Open     Closed

                             BASE I/O ADDRESS

     Address          JP6H          JP6I          JP6J           JP6K

  »      300h         Open          Open          Open          Closed

         320h         Open          Open         Closed          Open

         340h         Open         Closed         Open           Open

         360h        Closed         Open          Open           Open

                             BOOT ROM ADDRESS

    Address        JP6L        JP6M        JP6N       JP6O        JP6P

       C0000h     Closed      Closed      Closed     Closed      Closed

       C4000h     Closed      Closed      Closed     Closed       Open

  »    C8000h     Closed      Closed      Closed      Open       Closed

       CC000h     Closed      Closed      Closed      Open        Open

       D0000h     Closed      Closed       Open      Closed      Closed

       D4000h     Closed      Closed       Open      Closed       Open

       D8000h     Closed      Closed       Open       Open       Closed

       DC000h     Closed      Closed       Open       Open        Open

       E0000h     Closed       Open       Closed     Closed      Closed

[Image]

                             DIAGNOSTIC LED(S)

    LED         Color          Status                 Condition

    LED1         Red             Off            Power Off/card or link
                                                       failure

    LED1         Red          Blinking        Data is being transmitted

    LED1         Red             On         Data is not being transmitted

    LED2        Green            Off            Power Off/card or link
                                                       failure

    LED2        Green         Blinking         Data is being received

    LED2        Green            On               Data is not being
                                               received/link integrity
                                                     established

    LED3        Yellow           Off              Normal operation

    LED3        Yellow           On         Collision detected on network

    LED4        Orange           Off              Normal operation

    LED4        Orange           On          Card is transmitting for an
                                               extended time (jabber)

            Note:LED1 and LED2 only function when installed on a 10BaseT
            network. LED2 is also only functional when link integrity is
            enabled.