IBM CORPORATION TOKEN-RING 16/4 ADAPTER II NIC Type Token-Ring Transfer Rate 4/16Mbps Data Bus 16-bit ISA Topology Ring Wiring Type Unshielded twisted pair Shielded twisted pair via DB-9 port Boot ROM Available [Image] BOOT ROM ADDRESS AND I/O BASE ADDRESS Boot ROM I/O Address SW1/1 SW1/2 SW1/3 C0000h 86A0h On On On C4000h 96A0h Off On On C8000h A6A0h On Off On » CC000h B6A0h Off Off On D0000h C6A0h On On Off D4000h D6A0h Off On Off D8000h E6A0h On Off Off DC000h F6A0h Off Off Off INTERRUPT REQUEST IRQ SW1/4 SW1/5 2/9 On On 10 Off On 11 On Off » 15 Off Off WAIT STATE Setting SW1/6 » Normal On Additional wait states added to Off I/O cycle Note:If the card is installed in a fast computer, the card may need to slow down the I/O cycle by adding wait states. COMPATIBILITY MODE Setting SW1/7 » Disabled On Enabled Off Note:On some systems the data bus timing is not truly IBM PC/AT compatible. If the card is not initializing, enabling compatibility mode may allow the card to operate properly. BOOT ROM Setting SW1/8 » Disabled On Enabled Off DMA CHANNEL Channel SW1/9 SW1/10 » Disabled Off Off DMA5 On On DMA6 Off On DMA7 On Off NETWORK SEGMENT SPEED Speed SW1/11 » 4Mbps On 16Mbps Off Note:All cards on the network segment must have this option set identically. CABLE TYPE Type SW1/12 » Shielded twisted pair On Unshielded twisted pair Off