DANPEX CORPORATION

EN/2T

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      16-bit MCA
Topology      Star
Wiring Type   Unshielded twisted pair

              AUI transceiver via DB-15 port
Boot ROM      Available

[Image]

                            LINK INTEGRITY TEST

                Setting                                 JP1

  »                Enabled                       Pins 2 & 3 closed

                  Disabled                       Pins 1 & 2 closed

  Note:The link integrity test is only valid when the cable type is
  unshielded twisted pair.

                                CABLE TYPE

                   Type                              JP2A - JP2I

  »         Unshielded twisted pair               Pins 2 & 3 closed

        AUI transceiver via DB-15 port            Pins 1 & 2 closed

  FACTORY CONFIGURED SETTINGS

     Jumper         Setting

      JP3            Unused

                             DIAGNOSTIC LED(S)

       LED               Status                     Condition

       LED1                On            Twisted pair connection is good

       LED1               Off           Twisted pair connection is broken

       LED2                On               Data is being transmitted

       LED2               Off             Data is not being transmitted

       LED3                On             Collision detected on network

       LED3               Off                   Normal operation

       LED4                On                Data is being received

       LED4               Off              Data is not being received