DANPEX CORPORATION

EW-2016

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      16-bit ISA
Topology      Linear Bus
Wiring Type   RG58A/U 50ohm coaxial

              AUI transceiver via DB-15 port
Boot ROM      Not available

[Image]

                                CABLE TYPE

                   Type                              JP1A & JP1B

  »          RG58A/U 50ohm coaxial                Pins 1 & 2 closed

        AUI transceiver via DB-15 port            Pins 2 & 3 closed

                             I/O BASE ADDRESS

     Address          JP3A          JP3B          JP3C           JP3D

         200h        Closed        Closed        Closed         Closed

         220h        Closed        Closed        Closed          Open

         240h        Closed        Closed         Open          Closed

         260h        Closed        Closed         Open           Open

  »      280h        Closed         Open         Closed         Closed

         2A0h        Closed         Open         Closed          Open

         2C0h        Closed         Open          Open          Closed

         2E0h        Closed         Open          Open           Open

         300h         Open         Closed        Closed         Closed

         320h         Open         Closed        Closed          Open

         340h         Open         Closed         Open          Closed

         360h         Open         Closed         Open           Open

         380h         Open          Open         Closed         Closed

         3A0h         Open          Open         Closed          Open

         3C0h         Open          Open          Open          Closed

         3E0h         Open          Open          Open           Open

                                 BOOT ROM

                 Setting                               JP3H

  »                Enabled                            Closed

                  Disabled                             Open

                         BOOT ROM ADDRESS AND SIZE

  ROM Address     Boot ROM    JP3E       JP3F       JP3G     JP4A & JP4B
                   Size

       C8000h      16KB      Closed      Open      Closed     Pins 1 & 2
                                                                closed

       C8000h      32KB      Closed      Open      Closed     Pins 2 & 3
                                                                closed

       CC000h      16KB       Open      Closed      Open      Pins 1 & 2
                                                                closed

  »    D0000h      16KB       Open      Closed     Closed     Pins 1 & 2
                                                                closed

       D0000h      32KB       Open      Closed     Closed     Pins 2 & 3
                                                                closed

       D8000h      16KB       Open       Open      Closed     Pins 1 & 2
                                                                closed

       DC000h      16KB       Open       Open       Open      Pins 1 & 2
                                                                closed

                          OPERATING SYSTEM SELECT

           Operating system                            JP5

  »                 DOS                         Pins 1 & 2 closed

                   OS/2                         Pins 2 & 3 closed

                            ONBOARD TERMINATOR

                 Setting                                JP7

  »               Disabled                             Open

                   Enabled                            Closed

  Note:If the card is the last in the line of network cards, the onboard
  terminator may be enabled instead of using an external terminator

                                INTERRUPT REQUEST

   IRQ      JP8A     JP8B     JP8C     JP8D    JP8E     JP8F     JP8G     JP8H

      2/9   Open     Open     Open     Open    Closed   Open     Open     Open

  »   3    Closed    Open     Open     Open    Open     Open     Open     Open

      4     Open    Closed    Open     Open    Open     Open     Open     Open

      5     Open     Open    Closed    Open    Open     Open     Open     Open

      7     Open     Open     Open    Closed   Open     Open     Open     Open

      10    Open     Open     Open     Open    Open     Closed   Open     Open

      11    Open     Open     Open     Open    Open     Open     Closed   Open

      15    Open     Open     Open     Open    Open     Open     Open     Closed

  FACTORY CONFIGURED SETTINGS

     Jumper         Setting

      JP6            Unused