PROTEON, INC. PRONET-10 P1308 NIC Type Token Ring Transfer Rate 4/16Mbps Data Bus 16-bit ISA Topology Star Wiring Type Unshielded twisted pair AUI transceiver via DB-15 port Boot ROM Available [Image] NODE ADDRESS Node SW1/1 SW1/2 SW1/3 SW1/4 SW1/5 SW1/6 SW1/7 SW1/8 0 - - - - - - - - 1 Off On On On On On On On 2 On Off On On On On On On 3 Off Off On On On On On On 4 On On Off On On On On On 251 Off Off On Off Off Off Off Off 252 On On Off Off Off Off Off Off 253 Off On Off Off Off Off Off Off 254 On Off Off Off Off Off Off Off 255 Off Off Off Off Off Off Off Off Note:Node address 0 is used for messaging between nodes and must not be used. A total of 255 node address settings are available. The switches are a binary representation of the decimal node addresses. Switch 1 is the Least Significant Bit and switch 8 is the Most Significant Bit. The switches have the following decimal values: switch 1=1, 2=2, 3=4, 4=8, 5=16, 6=32, 7=64, 8=128. Turn off the switches and add the values of the off switches to obtain the correct node address. (On=0, off=1) 16-BIT DMA CHANNEL Channel JP1 JP15 » DMA5 Pins 3 & 4 and 5 & 6 Pins 2 & 3 closed closed DMA6 Pins 3 & 4 and 2 & 7 Pins 2 & 4 closed closed DMA7 Pins 3 & 4 and 1 & 8 Pins 1 & 2 closed closed Disabled Open Open Note:For use in an AT-class machine only. 8-BIT DMA CHANNEL Channel JP7 JP18 » DMA1 Pins 3 & 4 and 2 & 7 Pins 1 & 2 closed closed DMA2 Pins 3 & 4 and 1 & 8 Pins 2 & 3 closed closed DMA3 Pins 3 & 4 and 5 & 6 Pins 2 & 4 closed closed Disabled Open Open Note:Can be used in either a PC/XT-class machine or an AT-class machine. INTERRUPT REQUEST IRQ JP22 » 2 Pins 2 & 6 closed 3 Pins 5 & 9 closed 4 Pins 4 & 8 closed 5 Pins 3 & 7 closed 10 Pins 9 & 13 closed 11 Pins 8 & 12 closed 12 Pins 7 & 11 closed 14 Pins 1 & 6 closed 15 Pins 6 & 10 closed COMPATIBILITY MODE Setting JP32 JP36 » Compatibility mode Pins 1 & 2 closed Pins 1 & 2 closed enabled Extended mode enabled Pins 2 & 3 closed Pins 2 & 3 closed Note:Extended mode provides 16-bit data transfers and hardware checksums in an AT-class machine when the card is installed in a 16-bit slot. When the card is installed in an 8-bit slot, extended mode only provides hardware checksums. BOOT ROM Setting JP38 » Disabled Open Enabled Closed CABLE TYPE Type JP40 JP42 JP44 JP46 Unshielded twisted pair Closed Closed Closed Closed AUI transceiver via DB-15 port Open Open Open Open BOOT ROM ADDRESS Address SW2/1 SW2/2 SW2/3 SW2/4 C0000h On On On On C4000h On On On Off C8000h On On Off On CC000h On On Off Off D0000h On Off On On D4000h On Off On Off » D8000h On Off Off On DC000h On Off Off Off E0000h Off On On On E4000h Off On On Off E8000h Off On Off On EC000h Off On Off Off F0000h Off Off On On F4000h Off Off On Off F8000h Off Off Off On FC000h Off Off Off Off I/O BASE ADDRESS Address SW2/5 SW2/6 SW2/7 SW2/8 300h 1 On On On On 308h On On On Off 310h 1 On On Off On 318h On On Off Off 320h 1 On Off On On 328h On Off On Off 330h 1 On Off Off On 338h On Off Off Off 340h 1 Off On On On 348h Off On On Off 350h 1 Off On Off On 358h Off On Off Off 360h 1 Off Off On On 368h Off Off On Off 370h 1 Off Off Off Off 378h Off Off Off Off Note: Use any of the above settings when compatibility mode (JP32 & JP36) is enabled. Note 1 :Use only these settings when extended mode (JP32 & JP36) is enabled.