PROTEON, INC.
PRONET-4/16 MODEL P1390
NIC Type Token-Ring
Transfer Rate 4/16Mbps
Data Bus 16-bit ISA
Topology Ring
Wiring Type Unshielded twisted pair
Shielded twisted pair
Boot ROM Available
[Image]
BOOT ROM
Setting JP1
» Disabled Closed
Enabled Open
INTERRUPT REQUEST
IRQ JP2A JP2B JP2C JP2D JP2E JP2F JP2G JP2H JP2I
2/9 Open Open Open Closed Open Open Open Open Open
3 Open Open Open Open Open Open Open Open Closed
4 Open Open Open Open Open Open Open Closed Open
5 Open Open Open Open Open Open Closed Open Open
6 Open Open Open Open Open Closed Open Open Open
7 Open Open Open Open Closed Open Open Open Open
10 Open Open Closed Open Open Open Open Open Open
11 Open Closed Open Open Open Open Open Open Open
12 Closed Open Open Open Open Open Open Open Open
SA ADDRESS ENABLE (SAEN)
Mode JP3
» SAEN enabled Closed
SAEN disabled Open
Note:The SAEN jumper is provided for systems that are not 100% ISA
compatible. If the you get a DMA data error or if the card fails to
initialize, you should disabled SAEN.
I/O BASE ADDRESS
Address JP4A JP4B JP4C JP4D JP4E JP4F JP4G JP4H
0120h Closed Closed Closed Closed Closed Closed Closed Open
0220h Closed Closed Closed Closed Closed Closed Open Closed
0320h Closed Closed Closed Closed Closed Closed Open Open
0420h Closed Closed Closed Closed Closed Open Closed Closed
» 0A20h Closed Closed Closed Closed Open Closed Open Closed
FC20h Open Open Open Open Open Open Closed Closed
FD20h Open Open Open Open Open Open Closed Open
FE20h Open Open Open Open Open Open Open Closed
FF20h Open Open Open Open Open Open Open Open
Note: A total of 255 I/O address settings are available. The switches are a
binary representation of the two most significant digits in the Hexadecimal I/O
address, the two least significant bits are set at 0020h. JP4H is the Least
Significant Bit and JP4A is the Most Significant Bit. The jumpers have the
following decimal values: jumper H=1, G=2, F=4, E=8, D=16, C=32, B=64, A=128.
open the jumpers and add the values of the open jumpers. Convert that number to
a hexadecimal number, and use it as the two left most digits in the numer
"xx20h". If using Banyan VINES network, the I/O addresses are limited to the
range between and including 0120h to 0F20h.
DMA CHANNEL
Channel JP5A & JP5B JP5C & JP5D JP5E & JP5F
» DMA5 Open Open Closed
DMA6 Open Closed Open
DMA7 Closed Open Open
DMA CLOCK
Speed JP6A JP6B JP6C JP6D
» Bus speed Open Open Open Closed
4MHz Open Open Closed Open
8MHz Open Closed Open Open
16MHz Closed Open Open Open