CABLETRON SYSTEMS, INC.

E6030/-X, E6040/-X (Fiber Optic)

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      32-bit NuBus (Apple)
Topology      Star
Wiring Type   200µ fiber optic cable

              AUI transceiver via DB-15 port
Boot ROM      Not Available

[Image]

                                CONNECTIONS

               Purpose                              Location

   SMA 905 Receive Connector (gray)                   CN1

  SMA 905 Transmit Connector (black)                  CN2

                              SIGNAL QUALITY

                 Setting                                JP2

  »           SQE test disabled                  Pins 2 & 3 Closed

               SQE test enabled                  Pins 1 & 2 Closed

  Note:Signal Quality Error (SQE) is an internal test of the collision
  circuit and path.

                                CABLE TYPE

                   Type                               Switch PSS

  »          200µ fiber optic cable                      Off

         AUI transceiver via DB-15 port                   On

[Image]

                             DIAGNOSTIC LED(S)

    LED         Color          Status                 Condition

     1          Green        On/Blinking      Data is being transmitted

     1          Green            Off        Data is not being transmitted

     2           Red         On/Blinking    Collision detected on network

     2           Red             Off              Normal operation

     3          Yellow       On/Blinking       Data is being received

     3          Yellow           Off         Data is not being received

     4          Green            On              Fiber optic network
                                                 connection is good

     4          Green            Off             Fiber optic network
                                                connection is broken