CABLETRON SYSTEMS, INC.

E1030/-X, E1040/-X (Fiber Optic)

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      8-bit ISA
Topology      Star

              Linear Bus
Wiring Type   200µ fiber optic cable

              AUI transceiver via DB-15 port
Boot ROM      Not Available

[Image]

                                CONNECTIONS

               Purpose                              Location

   SMA 905 Receive Connector (gray)                   CN1

  SMA 905 Transmit Connector (black)                  CN2

                             INTERRUPT REQUEST

    IRQ        JP1A      JP1B      JP1C       JP1D      JP1E       JP1F

      2/9      Open      Open      Open       Open      Open      Closed

  »    3      Closed     Open      Open       Open      Open       Open

       4       Open     Closed     Open       Open      Open       Open

       5       Open      Open     Closed      Open      Open       Open

       6       Open      Open      Open      Closed     Open       Open

       7       Open      Open      Open       Open     Closed      Open

                             I/O BASE ADDRESS

          Address                    JP2                     JP3

  »           220h                  Closed                  Closed

              280h                  Closed                   Open

              300h                   Open                   Closed

              380h                   Open                    Open

                                CABLE TYPE

                    Type                                  SW1

  »           200µ fiber optic cable                      On

          AUI transceiver via DB-15 port                  Off

                      SIGNAL QUALITY ERROR (SQE) TEST

                  Setting                                SW2

  »                 Disabled                             Off

                    Enabled                              On

  Note:Signal Quality Error (SQE) is a test of the collision circuitry
  and path.

[Image]

                             DIAGNOSTIC LED(S)

    LED         Color          Status                 Condition

     1          Green        On/Blinking      Data is being transmitted

     1          Green            Off        Data is not being transmitted

     2           Red         On/Blinking    Collision detected on network

     2           Red             Off              Normal operation

     3          Yellow       On/Blinking       Data is being received

     3          Yellow           Off         Data is not being received

     4          Green            On              Fiber optic network
                                                 connection is good

     4          Green            Off             Fiber optic network
                                                connection is broken