DANPEX CORPORATION (ADI SYSTEMS, INC.)

Aquila AQ-EISA

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      32-bit EISA
Topology      Star

              Linear bus
Wiring Type   RG-58/U 50ohm coaxial

              Unshielded twisted pair

              AUI Transceiver via DB-15 port
Boot ROM      Not Available

[Image]

                                CABLE TYPE

             Type                       JP1                 JP3-10

  »        RG-58A/U 50ohm        Pins 1 & 2 Closed     Pins 1 & 2 Closed

         AUI transceiver via     Pins 1 & 2 Closed     Pins 2 & 3 Closed
             DB-15 port

       Unshielded twisted pair   Pins 2 & 3 Closed            N/A

                            LINK INTEGRITY TEST

                Setting                                JP31

  »                Enabled                       Pins 1 & 2 Closed

                  Disabled                       Pins 2 & 3 Closed

  Note:Link Integrity is only used with 10Base-T wiring. When using an
  AUI transciever, the test should be disabled.

                             DIAGNOSTIC LED(S)

     LED         Color         Status                 Condition

    LED1         Green           On          Data is being transmitted or
                                                      received

    LED1          Red         Blinking      Data is not being transmitted
                                                     or received

    LED1          Red            Off             Twisted pair network
                                                 connection is good