GATEWAY COMMUNICATIONS, INC.

G/EtherNet 8 Adapter (FUJITSU CHIPSET)

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      8-bit ISA
Topology      Linear Bus
Wiring Type   RG-58A/U 50ohm coaxial
Boot ROM      Available

[Image]

                             INTERRUPT REQUEST

   IRQ        JP1       JP2        JP3       JP4        JP5        JP6

      2     Closed      Open      Open       Open       Open       Open

      3      Open      Closed     Open       Open       Open       Open

      4      Open       Open     Closed      Open       Open       Open

  »   5      Open       Open      Open      Closed      Open       Open

      6      Open       Open      Open       Open      Closed      Open

      7      Open       Open      Open       Open       Open      Closed

                             I/O BASE ADDRESS

        Address              SW1/1            SW1/2            SW1/3

          260-27F              On               On               On

          280-29F             Off               On               On

  »       2A0-2BF              On              Off               On

          2E0-2FF             Off              Off               On

          300-31F              On               On              Off

          320-33F             Off               On              Off

          380-39F              On              Off              Off

          3E0-3FF             Off              Off              Off

                                                                         .

                       BOOT ROM ADDRESS

  PROM Address       SW1/4           SW1/5          SW1/6

  C4000-C7FFF         On              On              On

  C8000-CBFFF         Off             On              On

  CC000-CFFFF         On              Off             On

  D0000-D3000         Off             Off             On

  D4000-D7000         On              On             Off

  D8000-DBFFF         Off             On             Off

  DC000-DFFFF         On              Off            Off

   Disabledd          Off             Off            Off

                                WAIT STATE

                 Setting                               SW1/7

  »       Zero wait states disabled                     Off

           Zero wait states enabled                      On

                            MISCELLANEOUS NOTES

  Different drivers must be used for the National & the Fujitsu chipset
  cards, & are not interchangeable. Fujitsu adapters may be used for
  either 8 or 16 bit Fujitsu cards. While the National chipset cards
  require a different driver for an 8 or 16 bit card.