IBM CORPORATION

PC NETWORK ADAPTER II (BROADBAND)

NIC Type      Broadband
Transfer Rate Unidentified
Data Bus      8-bit ISA
Topology      Star
Wiring Type   RG-11/U

              RG-59A/U coaxial
Boot ROM      Not Available

[Image]

                        INTERRUPT REQUEST SELECTION

                 IRQ                                  JP1

  »                 2                          Pins 1 & 2 closed

                    3                          Pins 2 & 3 closed

                           I/O ADDRESS SELECTION

               Address                                 JP4

  »                620h                         Pins 1 & 2 closed

                   628H                         Pins 2 & 3 closed

                       BASE MEMORY ADDRESS SELECTION

                Address                                JP5

  »                CC00h                        Pins 1 & 2 closed

                   DC00h                        Pins 2 & 3 closed

                          ROM BIOS CONFIGURATION

               » Setting                                JP7

  »               Disabled                       Pins 2 & 3 closed

  »                Enabled                       Pins 1 & 2 closed

                                 BOOT ROM

               » Setting                                JP6

  »               Disabled                       Pins 1 & 2 closed

  »                Enabled                       Pins 2 & 3 closed

                       MISCELLANEOUS TECHNICAL NOTES

  The DMA channel is permanently fixed at 3. If two adapters will be
  installed into one station then disable the ROM BIOS on the second
  adapter.