KINGSTON TECHNOLOGY CORPORATION

KTM-DCAT/127, KTM-DCAT/209, KTM-DCAT/260,

KTM-DCAT/340

Card Type                  Memory card, Fixed hard drive, Hard drive
                           controller card
Maximum Onboard Memory     16MB DRAM
Hard Drives supported      One fixed proprietary drive
Data Bus                   16-bit ISA
Card Size                  Full-length, full-height card

[Image]

                              CONNECTIONS

              Function                             Label

  Proprietary hard drive interface                  CN1

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

  »   Memory disabled                           SW1/1           On

      Memory enabled                            SW1/1           Off

  »   Card is first memory board in PC          SW1/2           On

      Card is second memory board in PC         SW1/2           Off

  »   Factory configured - do not alter.        SW1/3           On

  »   Parity checking enabled                   SW1/6           On

      Parity checking disabled                  SW1/6           Off

                            ROM ADDRESS SELECT

              Address                     SW1/4               SW1/5

  »       C800h (non-bootable)              On                 On

          CC00h (non-bootable)             Off                 On

          D800h (non-bootable)              On                 Off

            DC00h (bootable)               Off                 Off

                         BANK 1 DRAM CONFIGURATION

            Size                     SW2/1                  SW2/2

     No SIMMs installed               On                     On

      2MB ((2) x 1MB )                Off                    On

      8MB ((2) x 4MB)                 Off                    Off

  Note: Bank 1 is market as P1 and P2 on the card (exact location
  unidentified).

  Bank 1 must be filled first before memory in Bank 2 can be detected.

                         BANK 2 DRAM CONFIGURATION

            Size                     SW2/1                  SW2/2

     No SIMMs installed               On                     On

      2MB ((2) x 1MB )                Off                    On

      8MB ((2) x 4MB)                 Off                    Off

  Note: Bank 2 is market as P3 and P4 on the card (exact location
  unidentified).

  Bank 1 must be filled first before memory in Bank 2 can be detected.