ARTOP ELECTRONIC CORPORATION

AEC6710F

Card Type               Hard drive controller card
Hard Drives supported   Up to 7 SCSI-2 Fast devices
Floppy drives supported None
Data Bus                32-bit PCI
Card Size               Full-height, quarter-length card


[Image]

                                CONNECTIONS

        Function           Location          Function           Location

  50-pin SCSI connector      CN1      4-pin connector -           JP3
  - external                          drive active LED

  50-pin SCSI connector      CN2
  - internal

                        USER CONFIGURABLE SETTINGS

                 Function                    Label          Position

  »   Termination power supply                JP2         Unidentified

  »   Factory configured - do not alter       JP5             N/A

  »   Flash ROM normal mode                   JP6      Pins 1 & 2 closed

      Flash ROM emergency mode                JP6      Pins 2 & 3 closed

            Note: Jumper JP6 position 2 & 3 is for emergency use only.
            When the system has written to the Flash ROM more than 10,
            000 times, an error message is posted that requests jumper
            JP6 be moved to pins 2 & 3. The flash ROM should then be
            replaced as soon as possible so normal mode can be resumed.