JAMECO ELECTRONIC COMPONENTS

JE1066A

Card Type               Hard drive controller card
Hard Drives supported   Two IDE (AT) drives
Floppy drives supported Two 360KB, 720KB, 1.2MB, or 1.44MB drives
Data Bus                16-bit ISA
Card Size               Half-length, half-height card

[Image]

                                CONNECTIONS

        Function           Location          Function          Location

  34-pin cable               CN1        10-pin serial port        CN5
  connector - floppy                    2 - internal
  drive

  16-pin game port           CN2        25-pin parallel           CN6
                                        port - external

  40-pin IDE(AT)             CN3        4-pin connector -         J2
  connector                             drive active LED

  9-pin serial port 1        CN4
  - external

                        USER CONFIGURABLE SETTINGS

                  Function                    Label         Position

  IOCHRDY signal                                J1        Unidentified

  Serial port 2 COM 2(2F8h) select             JP1      Pins 1 & 2 closed

  Serial port 2 COM 4(2E8h) select             JP1      Pins 2 & 3 closed

  Serial port 2 enabled                        JP2      Pins 1 & 2 closed

  Serial port 2 disabled                       JP2      Pins 2 & 3 closed

  Game port enabled                            JP3      Pins 1 & 2 closed

  Game port disabled                           JP3      Pins 2 & 3 closed

  Serial port 1 COM 1(3F8h) select             JP4      Pins 1 & 2 closed

  Serial port 1 COM 3(3E8h) select             JP4      Pins 2 & 3 closed

  Parallel port is LPT2(378h)                  JP5      Pins 1 & 2 closed

  Parallel port is LPT3(278h)                  JP5      Pins 2 & 3 closed

  Serial port 1 enabled                        JP6      Pins 1 & 2 closed

  Serial port 1 disabled                       JP6      Pins 2 & 3 closed

  Floppy drive interface enabled               JP7      Pins 1 & 2 closed

  Floppy drive interface disabled              JP7      Pins 2 & 3 closed

  IDE(AT) interface is primary                 JP8      Pins 2 & 3 closed

  IDE(AT) interface is secondary               JP8      Pins 1 & 2 closed

  IDE(AT) interface enabled                    JP9      Pins 1 & 2 closed

  IDE(AT) interface disabled                   JP9      Pins 2 & 3 closed

  Parallel port enabled                        JP10     Pins 1 & 2 closed

  Parallel port disabled                       JP10     Pins 2 & 3 closed