INITIO CORPORATION

INI-9090U

Card Type               Hard drive controller
Data Bus                32-bit PCI
Card Size               Half-length, full-height card
Hard Drives supported   Up to 7 Ultra SCSI devices
Floppy drives supported None

[Image]

                                CONNECTIONS

       Function           Location          Function           Location

  50-pin SCSI                J1         4-pin connector -         J3
  connector - internal                  drive active LED

  50-pin SCSI                J2
  connector - external

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

  »    Host adapter is only one in system        JP1           Open
       (see note below)

       Host adapter shares SCSI bus with         JP1          Closed
       adapter in another computer

  »    PC BIOS select                            JP2        Pins 1 & 2
                                                              closed

       MAC BIOS select                           JP2        Pins 2 & 3
                                                              closed

            Note: Closing jumper JP1 sets active termination so it is
            always on. The setting is used when the adapter shares the
            SCSI bus with an adapter in another computer. If that
            computer can be turned off, closing the jumper will insure
            that active on-board termination is on all the time,
            regardless of whether power is applied or not.