PROMISE TECHNOLOGY, INC.

DC5030D

Card Type               Hard drive controller
Hard Drives supported   Four IDE (AT) drives
Floppy drives supported None
Data Bus                32-bit PCI
Card Size               Half-length, full-height

[Image]

                                CONNECTIONS

        Function           Location          Function           Location

  40-pin primary IDE(AT)      J1      Mini ISA IRQ support        JP1
  connector                           card connector

  40-pin secondary            J2      4-pin connector -           JP5
  IDE(AT) connector                   drive active LED

                           JP1 CONNECTOR PIN-OUT

       Pin #              Function             Pin #          Function

       1 - 3            Unidentified             5              IRQ15

         4                 IRQ14              6 - 14         Unidentified

                        USER CONFIGURABLE SETTINGS

                  Function                    Label         Position

  PCI INT (A - D) enabled                      JP2           Closed

  PCI INT (A - D) disabled                     JP2            Open

  Relocatable I/O address disabled            JP3/A     Pins 1 & 2 closed

  Relocatable I/O address enabled             JP3/A     Pins 2 & 3 closed

  Primary IDE (AT) interface enabled          JP3/C     Pins 2 & 3 closed

  Secondary IDE (AT) interface enabled        JP3/C     Pins 1 & 2 closed

  Connection to ISA IRQ14 enabled             JP3/D     Pins 1 & 2 closed

  Connection to ISA IRQ15 enabled             JP3/D     Pins 2 & 3 closed

           CACHE MEMORY CONFIGURATION

      Size           Bank 0          Bank 1

  Unidentified    Unidentified    Unidentified

          BIOS ADDRESS SELECTION

       Address              JP3/B

       D8000h         Pins 1 & 2 closed

       DC000h         Pins 2 & 3 closed

                PCI INTERRUPT SELECTION

          Setting                      JP4

           INTA                 Pins 1 & 3 closed

           INTB                 Pins 3 & 5 closed

           INTC                 Pins 2 & 4 closed

           INTD                 Pins 4 & 6 closed

            Note:You can only use one INT at a time.