TANDY/RADIO SHACK

250-1095

Card type               Hard drive controller
Hard Drives supported   Two IDE (AT) drives
Floppy drives supported None
Data Bus                8-bit ISA
Card Size               Full-length, full-height card

[Image]

                               CONNECTIONS

              Function                            Location

  40-pin primary IDE(AT) connector                  CN1

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

  »   Factory configured - do not alter           E3           Open

  »   Factory configured - do not alter           E4           Open

  »   Factory configured - do not alter           E5           Open

  »   Factory configured - do not alter           E6           Open

  »   Factory configured - do not alter           E7           Open

                          BIOS ADDRESS SELECTION

          Address                     E1                      E2

  »          C8000h                  Open                    Open

             CA000h                 Closed                   Open

             CC000h                  Open                   Closed

             CE000h                 Closed                  Closed