DIVERSE LOGISTICS INC.

ULTRA-WINDJAMMER

Maximum Onboard Memory  Unidentified
Hard Drives supported   30 Ultra-SCSI devices
Floppy drives supported None
Data Bus                External
Card Size               14cm x 20 cm
RAID levels supported   0, 1

[Image]

                                CONNECTIONS

        Function           Location          Function          Location

  68-pin SCSI connector      CN3       68-pin SCSI                CN7
  channel 0 -- internal                connector to host -
                                       external

  68-pin SCSI connector      CN4       3-pin proprietary          CN8
  channel 1 - internal                 JST (RS-232)
                                       connector - see note
                                       below

  Proprietary connector      CN6       Power connector            CN9
  - differential
  converter board
  (optional)

            Note: CN8, the JST connector, can be connected to a DE-9
            serial connector using a supplied cable that performs signal
            conversion. This cable allows the Windjammer to be connected
            to a VT100/VT220 terminal or terminal emulator.

            Note: CN6 or CN7 connects the Ultra-Windjammer controller to
            the host system. CN6 allows the Windjammer to interface to
            host systems with differential SCSI ports via an optional
            differential converter board.

            Note: CN3, CN4, and CN7 (68-pin connectors) can also be
            connected to 50-pin narrow SCSI via optional converters.

                         TERMINATION CONFIGURATION

      Channel           Bus           Controller          Termination
                                      Position             Required

   Controller to     SCSI Wide      At end of SCSI     RP1-RP5 installed
       Host                              bus

   Controller to     SCSI Wide      Not at end of       RP1-RP5 removed
       Host                           SCSI bus

   Controller to    SCSI Narrow     Not at end of      RP1-RP3 removed,
       Host                           SCSI bus
                                                      RP4 & RP5 installed

     Channel 0       SCSI Wide      At end of SCSI    RP14-RP18 installed
                                         bus

     Channel 0       SCSI Wide      Not at end of      RP14-RP18 removed
                                      SCSI bus

     Channel 0      SCSI Narrow     Not at end of     RP15--RP17 removed,
                                      SCSI bus
                                                          RP14 & RP18
                                                           installed

     Channel 1       SCSI Wide      At end of SCSI    RP7-RP11 installed
                                         bus

     Channel 1       SCSI Wide      Not at end of      RP7-RP11 removed
                                      SCSI bus

     Channel 1      SCSI Narrow     Not at end of       RP8, RP10 & RP11
                                      SCSI bus             removed,

                                                      RP7 & RP9 installed

           JST PINOUT

      Pin          Description

       1             Ground

       2          Receive Data

       3          Transmit Data