DATA TECHNOLOGY CORPORATION

DTC3290ASE

Maximum Onboard Memory  Unidentified
Data Bus                EISA
Card Size               Full height, three-quarters length
Hard Drives Supported   Up to 7 SCSI-2 devices
Floppy Drives Supported Unidentified

[Image]

                                CONNECTIONS

         Function            Label            Function            Label

  34-pin cable connector      J1       50-pin SCSI connector       J3
  - floppy drive                       - internal

  50-pin SCSI connector -     J2       4-pin drive active LED      LED
  external

                        USER CONFIGURABLE SETTINGS

                 Setting                    Label          Position

  »   Factory configured - do not alter      RP1         Unidentified

  »   Factory configured - do not alter      RP2         Unidentified

  »   Factory configured - do not alter      RP3         Unidentified

  »   Factory configured - do not alter      RP4         Unidentified

  »   Factory configured - do not alter      RP5         Unidentified

  »   Factory configured - do not alter      RP6         Unidentified

  »   Factory configured - do not alter      RP7         Unidentified

  »   Factory configured - do not alter      RP8         Unidentified

  »   Factory configured - do not alter      RP9         Unidentified

  »   Factory configured - do not alter      RP10        Unidentified

  »   Factory configured - do not alter      RP11        Unidentified

                            DRAM CONFIGURATION

            The configuration of the DRAM on this board is unidentified.

                            SCSI TERMINATION

            The method for selecting SCSI termination is unidentified.