UNITED MICROELECTRONICS CORPORATION

FSIO-UC3 (V1.2)

Data Bus                16-bit ISA
Card Size               Half-length, half-height card
Hard Drives supported   Two IDE (AT) drives
Floppy drives supported Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                                CONNECTIONS

        Function          Location           Function           Location

  40-pin IDE(AT)             CN1      10-pin serial port 2 -      CN5
  connector                           internal

  34-pin cable connector     CN2      25-pin parallel port -      CN6
  - floppy drive                      external

  16-pin game port           CN3      4-pin connector -            J2
                                      drive active LED

  10-pin serial port 1 -     CN4
  internal

  Note: The location of JP2 is unidentified.

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

  »   IOCHRDY signal enabled                     J1            Open

      IOCHRDY signal disabled                    J1           Closed

      Parallel port IRQ5 select                  J3          Pins 1 & 2
                                                              closed

      Parallel port IRQ7 select                  J3          Pins 2 & 3
                                                              closed

      Serial port 1 IRQ11 select                 J4          Pins 1 & 2
                                                              closed

      Serial port 1 IRQ4 select                  J4          Pins 2 & 3
                                                              closed

      Serial port 2 IRQ10 select                 J5          Pins 1 & 2
                                                              closed

      Serial port 2 IRQ3 select                  J5          Pins 2 & 3
                                                              closed

  »   Serial port 2 enabled                      JP2         Pins 1 & 2
                                                              closed

      Serial port 2 disabled                     JP2         Pins 2 & 3
                                                              closed

  »   Game port enabled                          JP3         Pins 1 & 2
                                                              closed

      Game port disabled                         JP3         Pins 2 & 3
                                                              closed

  »   Serial port 1 COM1 select                  JP4         Pins 1 & 2
                                                              closed

      Serial port 1 COM3 select                  JP4         Pins 2 & 3
                                                              closed

  »   Parallel port LPT2 select                  JP5         Pins 1 & 2
                                                              closed

      Parallel port LPT3 select                  JP5         Pins 2 & 3
                                                              closed

  »   Serial port 1 enabled                      JP6         Pins 1 & 2
                                                              closed

      Serial port 1 disabled                     JP6         Pins 2 & 3
                                                              closed

                  USER CONFIGURABLE SETTINGS (CONTINUED)

                 Function                    Label         Position

  »   Floppy drive interface enabled          JP7      Pins 1 & 2 closed

      Floppy drive interface disabled         JP7      Pins 2 & 3 closed

  »   Factory configured - do not alter       JP8        Unidentified

  »   IDE(AT) interface enabled               JP9      Pins 1 & 2 closed

      IDE(AT) interface disabled              JP9      Pins 2 & 3 closed

  »   Factory configured - do not alter      JP10        Unidentified

  Note: The jumper used to set COM PORTS for the Secondary Serial Port is
  unidentified.