SBE, INC. WSU-423S Card Type Controller Processor 80186 Processor Speed 20MHz Chip Set Unidentified Data Bus EISA Hard Drives Supported SCSI devices SCSI-3 devices Floppy Drives Supported Unidentified [Image] CONNECTIONS Function Label Function Label Unidentified J1 68-pin SCSI-3 connector J4 - internal Unidentified J2 68-pin SCSI-3 connector J5 - external 50-pin SCSI connector - J3 Unidentified WS internal USER CONFIGURABLE SETTINGS Setting Label Position » Active termination for 50-pin SCSI W1 Closed connector enabled Active termination for 50-pin SCSI W1 Open connector disabled » Active termination for 68-pin W2 Closed internal SCSI connector enabled Active termination for 68-pin W2 Open internal SCSI connector disabled » Active termination for 68-pin W3 Closed external SCSI connector enabled Active termination for 68-pin W3 Open external SCSI connector disabled SCSI TERMINATION J3 J4 J5 RP1 RP2 RP3 Used Not Not Not Installed Installed used used installed Used Used Not Installed Not Not used installed installed Used Not Used Installed Not Not used installed installed Not Used Not Installed Installed Installed used used Not Used Used Not Not Not used installed installed installed Not Not Used Installed Installed Installed used used DIAGNOSTIC LED(S) LED Color Status Condition LED1 Unidentified On Card is not functioning or improperly terminated LED1 Unidentified 1 blink ROM failed self-test LED1 Unidentified 2 blinks RAM failed self-test LED1 Unidentified 3 blinks SCSI controller chip or interface failed self-test LED1 Unidentified 4 blinks Internal data bus failed self-test LED1 Unidentified 5 blinks Internal address bus failed self-test LED1 Unidentified 6 blinks Bus controller chip failed self-test LED1 Unidentified Blinking Fuse is blown LED1 Unidentified Off Card is functioning normally