UNITED MICROELECTRONICS CORPORATION

FSIO-GSI

Data Bus                16-bit ISA
Card Size               Half-length, full-height card
Hard Drives supported   Two IDE (AT/XT) drives
Floppy drives supported Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                                CONNECTIONS

        Function          Location           Function           Location

  9-pin serial port 1 -     CN1       40-pin IDE(AT/XT)           CN5
  external                            connector

  10-pin serial port 2      CN2       16-pin game port            CN6
  - internal

  25-pin parallel port      CN3       4-pin connector -           J13
  - external                          drive active LED

  34-pin cable              CN4
  connector - floppy
  drive

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

  »   Floppy drive interface enabled             J1          Pins 1 & 2
                                                              closed

      Floppy drive interface disabled            J1          Pins 2 & 3
                                                              closed

  »   Floppy drive I/O address is 3F1-3F7h       J2          Pins 1 & 2
                                                              closed

      Floppy drive I/O address is 371-377h       J2          Pins 2 & 3
                                                              closed

  »   IDE(AT) interface enabled                  J3          Pins 1 & 2
                                                              closed

      IDE(AT) interface disabled                 J3          Pins 2 & 3
                                                              closed

  »   IDE I/O address is 1F0-1F7h                J4          Pins 1 & 2
                                                              closed

      IDE I/O address is 170-177h                J4          Pins 2 & 3
                                                              closed

  »   IDE I/O address is 320-323h                J5          Pins 1 & 2
                                                              closed

      IDE I/O address is 324-327h                J5          Pins 2 & 3
                                                              closed

  »   IDE(AT) interface select                   J6          Pins 1 & 2
                                                              closed

      IDE(XT) interface select                   J6          Pins 2 & 3
                                                              closed

  »   Serial port 1 enabled                      J7          Pins 1 & 2
                                                              closed

      Serial port 1 disabled                     J7          Pins 2 & 3
                                                              closed

  »   Serial port 1 I/O address is 3F8-3FFh      J8          Pins 1 & 2
                                                              closed

      Serial port I/O address is 3E8-3EFh        J8          Pins 2 & 3
                                                              closed

  »   Serial port 2 enabled                      J9          Pins 1 & 2
                                                              closed

      Serial port 2 disabled                     J9          Pins 2 & 3
                                                              closed

  »   Serial port 2 I/O address is 2F8-2FFh      J10         Pins 1 & 2
                                                              closed

      Serial port 2 I/O address is 2E8-2EFh      J10         Pins 2 & 3
                                                              closed

  »   Parallel port enabled                      J11         Pins 1 & 2
                                                              closed

      Parallel port disabled                     J11         Pins 2 & 3
                                                              closed