KOUWELL ELECTRONICS CORPORATION

KW-556G (REV. 2.0)

Data Bus                16-bit ISA
Card Size               Half-length, full-height card
Hard Drives supported   Two IDE (AT) drives
Floppy drives supported Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                                CONNECTIONS

        Function          Location           Function           Location

  16-pin game port           CN1      9-pin serial port 1 -       CN5
                                      external

  40-pin IDE(AT)             CN2      25-pin parallel port -      CN6
  connector                           external

  34-pin cable connector     CN3      4-pin connector -           JP1
  - floppy drive                      drive active LED

  10-pin serial port 2 -     CN4
  internal

                        USER CONFIGURABLE SETTINGS

                 Function                    Label          Position

  »   Factory configured - do not alter       J9          Unidentified

  »   Serial port 1 enabled                   JP2      Pins 1 & 2 closed

      Serial port 1 disabled                  JP2      Pins 2 & 3 closed

  »   Game port enabled                       JP3      Pins 1 & 2 closed

      Game port disabled                      JP3      Pins 2 & 3 closed

  »   Floppy drive interface enabled          JP4      Pins 1 & 2 closed

      Floppy drive interface disabled         JP4      Pins 2 & 3 closed

  »   Parallel port I/O address 378h          JP5      Pins 1 & 2 closed
      select

      Parallel port I/O address 278h          JP5      Pins 2 & 3 closed
      select

  »   IDE(AT) interface enabled               JP6      Pins 1 & 2 closed

      IDE(AT) interface disabled              JP6      Pins 2 & 3 closed

  »   Serial port 2 enabled                   JP7      Pins 1 & 2 closed

      Serial port 2 disabled                  JP7      Pins 2 & 3 closed

  »   Controller is only one in system        JP8      Pins 1 & 2 closed
      (I/O address is 1F0-1F7, 3F6, 3F7)

      Other controllers are in system         JP8      Pins 2 & 3 closed
      (I/O address is 170-177, 376, 377)

  »   Serial port 1 COM1 enabled              JP9      Pins 1 & 2 closed

      Serial port 1 COM3 enabled              JP9      Pins 2 & 3 closed

  »   Serial port 2 COM2 enabled             JP10      Pins 1 & 2 closed

      Serial port 2 COM4 enabled             JP10      Pins 2 & 3 closed