ADVANCED INTEGRATION RESEARCH, INC.

IDE-2V

 Data bus:                  32-bit VL-bus

 Size:                      Three-quarter length, half-height card

 Hard drive supported:      Two IDE(AT) drives

 Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                        CONNECTIONS

                Function                      Location

  34-pin cable connector - floppy drive          J1

  25-pin parallel port - external                J2

  10-pin serial port 2 - internal                J3

  10-pin serial port 1 - internal                J4

  40-pin IDE(AT) connector                       J5

  4-pin connector - drive active LED             J6

                        USER CONFIGURABLE SETTINGS

              Function
                                          Location
                                                              Setting

  »
      Serial port 1 IRQ 4 select
                                            JP23
                                                             Pins 2 & 3
                                                              closed


      Serial port 1 IRQ 3 select
                                            JP23
                                                             Pins 1 & 2
                                                              closed

  »
      Serial port 2 IRQ 3 select
                                            JP24
                                                             Pins 2 & 3
                                                              closed


      Serial port 2 IRQ 4 select
                                            JP24
                                                             Pins 1 & 2
                                                              closed

  »
      Parallel port IRQ 7 select
                                             JP9
                                                             Pins 2 & 3
                                                              closed


      Parallel port IRQ 5 select
                                             JP9
                                                             Pins 1 & 2
                                                              closed

  »
      Floppy drive interface
      enabled
                                            JP22
                                                             Pins 2 & 3
                                                              closed


      Floppy drive interface
      disabled
                                            JP22
                                                             Pins 1 & 2
                                                              closed

  »
      Turbo speed disabled
                                             JP1
                                                             Pins 2 & 3
                                                              closed


      Turbo speed enabled
                                             JP1
                                                             Pins 1 & 2
                                                              closed

  »
      Factory configured - do not
      alter
                                            JP29
                                                               Open

                      PARALLEL PORT ADDRESS SELECTION

             LPT                       JP19                  JP20

           LPT1 (378h)          Pins 1 & 2 closed      Pins 2 & 3 closed

  »        LPT2 (278h)          Pins 2 & 3 closed      Pins 2 & 3 closed

           LPT3 (3BCh)          Pins 2 & 3 closed      Pins 1 & 2 closed

             Disabled           Pins 1 & 2 closed      Pins 1 & 2 closed

                      SERIAL PORT 1 ADDRESS SELECTION

             COM
                                       JP15
                                                             JP16

  »
           COM1 (3F8h)
                                Pins 2 & 3 closed
                                                       Pins 2 & 3 closed


           COM2 (2F8h)
                                Pins 1 & 2 closed
                                                       Pins 2 & 3 closed


             Disabled
                                Pins 2 & 3 closed
                                                       Pins 1 & 2 closed

                      SERIAL PORT 2 ADDRESS SELECTION

             COM                       JP17                  JP18

  »        COM2 (2F8h)          Pins 2 & 3 closed      Pins 2 & 3 closed

           COM1 (3F8h)          Pins 1 & 2 closed      Pins 2 & 3 closed

             Disabled           Pins 2 & 3 closed      Pins 1 & 2 closed

                       IDE ENABLE/DISABLE SELECTION

           Setting
                                       JP8
                                                             JP21

  »
              Enable
                                       Open
                                                       Pins 2 & 3 closed


             Disable
                                      Closed
                                                       Pins 1 & 2 closed

                          IRQ14 BUFFER SELECTION

             IRQ14                       JP27                 JP28

  »       Direct from drive              Open                Closed

         Buffered from drive            Closed                Open

                        IDE RECOVERY TIME SELECTION

           Setting
                                       JP3
                                                              JP4


              120ns
                                Pins 1 & 2 closed
                                                       Pins 1 & 2 closed


              180ns
                                Pins 2 & 3 closed
                                                       Pins 1 & 2 closed


              240ns
                                Pins 1 & 2 closed
                                                       Pins 2 & 3 closed

  »
              300ns
                                Pins 2 & 3 closed
                                                       Pins 2 & 3 closed