ACCULOGIC, INC.

SIDE-4/PLUS (REV.2)

  Data bus:                  16-bit ISA

  Size:                      Half-length, half-height card

  Hard drive supported:      Two IDE(AT) drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                        CONNECTIONS

                Function                      Location

  40-pin primary IDE(AT) connector               J1

  4-pin connector - drive active LED             J2

  16-pin game port                               J3

  34-pin cable connector - floppy drive          J4

  10-pin serial port 2 internal                  J6

  9-pin serial port 1 - external                 J7

  25-pin parallel port - external                J8

  Note: Function of J9 is unidentified.

                        USER CONFIGURABLE SETTINGS

              Function                   Location            Setting

  »   Game port disabled                    JP1             Pins 1 & 2
                                                              closed

      Game port enabled                     JP1             Pins 2 & 3
                                                              closed

  »   Floppy drive interface                JP2             Pins 1 & 2
      enabled                                                 closed

      Floppy drive interface                JP2             Pins 2 & 3
      disabled                                                closed

  »   Floppy drive primary address          JP3             Pins 1 & 2
      is 3F0h                                                 closed

      Floppy drive secondary                JP3             Pins 2 & 3
      address is 370h                                         closed

  »   IDE(AT) interface enabled             JP4             Pins 1 & 2
                                                              closed

      IDE(AT) interface disabled            JP4             Pins 2 & 3
                                                              closed

  »   IDE primary address is 1F0h           JP5             Pins 1 & 2
                                                              closed

      IDE secondary address is              JP5             Pins 2 & 3
      170h                                                    closed

                  USER CONFIGURABLE SETTINGS (CONTINUED)

              Function                    Location           Setting

  »   IDE(AT) IRQ 14 select                 JP6             Pins 1 & 2
                                                              closed

      IDE(AT) IRQ 15 select                 JP6             Pins 2 & 3
                                                              closed

  »   IOCHRDY signal disabled               JP7             Pins 1 & 2
                                                              closed

      IOCHRDY signal enabled                JP7             Pins 2 & 3
                                                              closed

  »   Factory configured - do not           JP14               N/A
      alter

  »   Factory configured - do not           JP15               N/A
      alter

  »   Parallel port IRQ 7 select            JP16            Pins 1 & 2
                                                              closed

      Parallel port IRQ 5 select            JP16            Pins 2 & 3
                                                              closed

  »   Factory configured - do not           JP17            Pins 1 & 2
      alter                                                   closed

  »   Factory configured - do not           JP18            Pins 1 & 2
      alter                                                   closed

  »   Primary serial port IRQ 4             JP19            Pins 2 & 4
      select                                                  closed

      Primary serial port IRQ 3             JP19            Pins 3 & 4
      select                                                  closed

      Primary serial port IRQ 5             JP19            Pins 6 & 8
      select                                                  closed

      Primary serial port IRQ 9             JP19            Pins 7 & 8
      select                                                  closed

  »   Secondary serial port IRQ 3           JP19            Pins 1 & 3
      select                                                  closed

      Secondary serial port IRQ 4           JP19            Pins 1 & 2
      select                                                  closed

      Secondary serial port IRQ 9           JP19            Pins 5 & 7
      select                                                  closed

      Secondary serial port IRQ 5           JP19            Pins 5 & 6
      select                                                  closed

                      PARALLEL PORT ADDRESS SELECTION

             LPT                      JP12                   JP13

  »        LPT1 (378h)          Pins 1 & 2 closed      Pins 1 & 2 closed

           LPT2 (278h)          Pins 2 & 3 closed      Pins 2 & 3 closed

           LPT3 (3BCh)          Pins 1 & 2 closed      Pins 2 & 3 closed

             Disabled           Pins 2 & 3 closed      Pins 1 & 2 closed

                      SERIAL PORT 1 ADDRESS SELECTION

             COM                       JP8                    JP9

  »        COM1 (3F8h)          Pins 1 & 2 closed      Pins 1 & 2 closed

           COM3 (3E8h)          Pins 2 & 3 closed      Pins 2 & 3 closed

           COM4 (2E8h)          Pins 1 & 2 closed      Pins 2 & 3 closed

             Disabled           Pins 2 & 3 closed      Pins 1 & 2 closed

                      SERIAL PORT 2 ADDRESS SELECTION

             COM                      JP10                   JP11

  »        COM2 (2F8h)          Pins 1 & 2 closed      Pins 1 & 2 closed

           COM3 (3E8h)          Pins 1 & 2 closed      Pins 2 & 3 closed

           COM4 (2E8h)          Pins 2 & 3 closed      Pins 2 & 3 closed

             Disabled           Pins 2 & 3 closed      Pins 1 & 2 closed

              MISCELLANEOUS TECHNICAL NOTES

  The location of pin 1 on all jumpers is unidentified.