ACCULOGIC, INC.

SIDE-2/PCI

  Data bus:                  32-bit PCI

  Size:                      Half-length, half-height card

  Hard drive supported:      Four IDE(AT) drives

  Floppy drives supported:   None

[Image]

                             CONNECTIONS

                    Function                          Location

            40-pin primary IDE(AT) connector             J1

            2-pin connector - drive active LED           J2

            40-pin secondary IDE(AT) connector           J3

            10-pin ISA IRQ board connector               J5

                        USER CONFIGURABLE SETTINGS

             Function                    Location            Setting

  »   Factory configured - do not           J4                 N/A
      alter

                          ADDRESS MODE SELECTION

             Mode                      W2/A                  W2/B

  »           ISA IDE                   Off                   On

            Native mode                 On                    Off

                      PCI PRIMARY INTERRUPT SELECTION

          INT               W3/A         W3/B        W3/C         W3/D

  »      ISA IRQ 14          Off         Off          Off         Off

              A              On          Off          Off         Off

              B              Off          On          Off         Off

              C              Off         Off          On          Off

              D              Off         Off          Off          On

                     PCI SECONDARY INTERRUPT SELECTION

          INT               W4/A         W4/B        W4/C         W4/D

  »      ISA IRQ 15          Off         Off          Off         Off

              A              On          Off          Off         Off

              B              Off          On          Off         Off

              C              Off         Off          On          Off

              D              Off         Off          Off          On

                       MISCELLANEOUS TECHNICAL NOTES

            If IRQ 14 or 15 is selected, the ISA IRQ board is required.
            This board connects the primary IDE interrupt to the ISA bus
            IRQ 14 and secondary IDE interrupt to ISA bus IRQ 15.