UNIDENTIFIED

SMART A2

  Data bus:                  16-bit ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE(AT) drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                        CONNECTIONS

                Function                      Location

  4-pin connector - drive active LED             J1

  40-pin primary IDE(AT) connector               J4

  34-pin cable connector - floppy drive          J5

  10-pin serial port 2 - internal                J6

  9-pin serial port 1 - external                 J7

  25-pin parallel port - external                J8

                        USER CONFIGURABLE SETTINGS

             Function                   Location            Setting

  Floppy drive address select              J9                 open
  3F0h-3F7h

  Floppy drive address select              J9                closed
  370h-377h

  IDE(AT) interface enabled              JP2/A                open

  IDE(AT) interface disabled             JP2/A               closed

  Floppy drive interface enabled         JP2/B                open

  Floppy drive interface disabled        JP2/B               closed

  Serial port 1 enabled                   JP6                closed

  Serial port 1 disabled                  JP6                 open

  Serial port 2 enabled                   JP7                closed

  Serial port 2 disabled                  JP7                 open

  Parallel port LPT1 enable               JP8                closed

  Parallel port LPT1 disable              JP8                 open