ADVANCED COMPUTER TECHNOLOGY, LTD.

MIO-PLUS MK II

  Data bus:                  16-bit ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE(AT) drives

  Floppy drives supported:   Two 360KB or 1.2MB drives

[Image]

                        CONNECTIONS

                Function                      Location

  40-pin IDE(AT) connector                      CN1

  34-pin cable connector - floppy drive         CN2

  16-pin game port                              CN3

  10-pin serial port 2 - internal               CN4

  9-pin serial port 1 - external                CN5

  25-pin parallel port - external               CN6

                        USER CONFIGURABLE SETTINGS

              Function                    Location           Setting

  »   Serial port 1 IRQ 4 select            JP1             pins 2 & 3
                                                              closed

      Serial port 1 IRQ 3 select            JP1             pins 1 & 2
                                                              closed

  »   Serial port 2 IRQ 3 select            JP2             pins 1 & 2
                                                              closed

      Serial port 2 IRQ 4 select            JP2             pins 2 & 3
                                                              closed

  »   Parallel port IRQ 7 select            JP3             pins 2 & 3
                                                              closed

      Parallel port IRQ 5 select            JP3             pins 1 & 2
                                                              closed

  »   IOCHRDY signal from IDE               JP4             pins 2 & 3
      drive disabled                                          closed

      IOCHRDY signal from IDE               JP4          pins 1 & 2 open
      drive enabled

  »   Factory configured - do not           JP10               N/A
      alter

                  USER CONFIGURABLE SETTINGS (CONTINUED)

             Function                    Location            Setting

  »   Serial port 1 enabled                JP19             pins 1 & 2
                                                             closed

      Serial port 1 disabled               JP19             pins 2 & 3
                                                             closed

  »   Serial port 2 enabled                JP20             pins 1 & 2
                                                             closed

      Serial port 3 disabled               JP20             pins 2 & 3
                                                             closed

                      PARALLEL PORT ADDRESS SELECTION

             LPT                      JP17                   JP18

  »        LPT1 (378h)          pins 1 & 2 closed      pins 1 & 2 closed

           LPT2 (278h)          pins 2 & 3 closed      pins 1 & 2 closed

             Disabled           pins 1 & 2 closed      pins 2 & 3 closed

             Disabled           pins 2 & 3 closed      pins 2 & 3 closed

                      SERIAL PORT 1 ADDRESS SELECTION

              COM                       JP6                   JP7

  »         COM1(3F8h)           pins 2 & 3 closed     pins 2 & 3 closed

            COM2(2F8h)           pins 2 & 3 closed     pins 1 & 2 closed

            COM3(3E8h)           pins 1 & 2 closed     pins 2 & 3 closed

            COM4(2E8h)           pins 1 & 2 closed     pins 1 & 2 closed

                      SERIAL PORT 2 ADDRESS SELECTION

              COM                       JP8                   JP9

  »         COM2(2F8h)           pins 2 & 3 closed     pins 1 & 2 closed

            COM1(3F8h)           pins 2 & 3 closed     pins 2 & 3 closed

            COM3(3E8h)           pins 1 & 2 closed     pins 2 & 3 closed

            COM4(2E8h)           pins 1 & 2 closed     pins 1 & 2 closed