BUSLOGIC, INC. BT-510CD Data bus: 16-bit ISA Size: Full-length, full-height card Hard drive supported: Four IDE (AT) interface drives, Two ATAPI devices Floppy drives supported: Two 360KB, 720KB, 1.2MB, 1.44MB drives [Image] CONNECTIONS Function Location 40-pin connector - IDE (AT) interface 1 CN1 40-pin connector - IDE (AT) interface 2 CN2 34-pin connector - Floppy drive interface CN3 40-pin connector - ATAPI interface CN4 4-pin connector - Drive active LED JP1 4-pin connector - Speaker JP2 USER CONFIGURABLE SETTINGS Function Location Setting » ATAPI mode enabled JP3 closed ATAPI mode disabled JP3 open Note: If you are using two BT-510CD units in the same system, both cards must have ATAPI mode disabled. DRAM CONFIGURATION Size Bank 0 Bank 1 512KB (2) 256K x 9 NONE 1MB (2) 256K x 9 (2) 256K x 9 2MB (2) 1M x 9 NONE 2.5MB (2) 1M x 9 (2) 256K x 9 2.5MB (2) 256K x 9 (2) 1M x 9 4MB (2) 1M x 9 (2) 1M x 9 8MB (2) 4M x 9 NONE 8.5MB (2) 4M x 9 (2) 256K x 9 8.5MB (2) 256K x 9 (2) 4M x 9 10MB (2) 4M x 9 (2) 1M x 9 10MB (2) 1M x 9 (2) 4M x 9 16MB (2) 4M x 9 (2) 4M x 9