UNIDENTIFIED

IODE-3292U

  Data bus:                  16-bit ISA

  Size:                      Half-length, half-height card

  Hard drive supported:      Two IDE(AT) drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                                CONNECTIONS

                    Function                             Location

  40-pin IDE(AT) connector                                 CN1

  34-pin cable connector - floppy drive                    CN2

  16-pin game port                                         CN3

  10-pin serial port 2 - internal                          CN4

  9-pin serial port 1 - external, 10-pin                   CN5
  serial port 1 - internal

  25-pin parallel port - external                          CN6

  2-pin connector - drive active LED                       JP1

                        USER CONFIGURABLE SETTINGS

              Function                   Location            Setting

  Floppy drive interface enabled      JP2/pins 1 & 2         closed

  Floppy drive interface disabled     JP2/pins 2 & 3         closed

  Parallel port enabled               JP3/pins 1 & 2         closed

  Parallel port disabled              JP3/pins 2 & 3         closed

  Serial port 1 enabled               JP4/pins 1 & 2         closed

  Serial port 1 disabled              JP4/pins 2 & 3         closed

  Serial port 2 enabled               JP5/pins 1 & 2         closed

  Serial port 2 disabled              JP5/pins 2 & 3         closed

  Game port enabled                   JP6/pins 1 & 2         closed

  Game port disabled                  JP6/pins 2 & 3         closed

  IDE(AT) interface enabled           JP7/pins 1 & 2         closed

  IDE(AT) interface disabled          JP7/pins 2 & 3         closed

  Parallel port address 378h          JP9/pins 1 & 2         closed
  select

  Parallel port address 278h          JP9/pins 2 & 3         closed
  select

  Serial port 1 COM1 (3F8h) select    JP10/pins 1 & 2        closed

  Serial port 1 COM3 (3E8h) select    JP10/pins 2 & 3        closed

  Serial port 2 COM2 (2F8h) select    JP11/pins 1 & 2        closed

  Serial port 2 COM4 (2E8h) select    JP11/pins 2 & 3        closed

  IDE address is 1F0h                 JP12/pins 1 & 2        closed

  IDE address is 170h                 JP12/pins 2 & 3        closed

  Serial port 1 IRQ4 select           JP16/pins 1 & 2        closed

  Serial port 1 IRQ3 select           JP16/pins 2 & 3        closed

  Serial port 2 IRQ3 select           JP17/pins 1 & 2        closed

  Serial port 2 IRQ4 select           JP17/pins 2 & 3        closed

     MISCELLANEOUS TECHNICAL NOTES

  The purpose of J1 is unidentified.