DATA TECHNOLOGY CORPORATION DTC2280+ (400542-89A) Data bus: 16-bit ISA Size: Half-length, half-height card Hard drive supported: Two IDE(AT) interface drives Floppy drives supported: Two 360KB, 720KB, 1.2MB, 1.44MB [Image] CONNECTIONS Function Location 40-pin IDE(AT) interface connector J1 34-pin cable connector - floppy drive J2 9-pin serial port 1 - external J3 10-pin serial port 2 - internal J4 25-pin parallel port - external J5 16-pin game port - internal J6 2-pin connector - drive active LED JP8 USER CONFIGURABLE SETTINGS Function Location Setting » Floppy drives A & B normal JP6/1 pins 1 & 2 closed Floppy drives A & B reversed JP6/1 pins 2 & 3 closed » Floppy drive interface JP6/2 pins 2 & 3 closed address is 3F0h Floppy drive interface JP6/2 pins 1 & 2 closed address is 370h » IDE(AT) interface enabled JP6/3 pins 1 & 2 closed IDE(AT) interface disabled JP6/3 pins 2 & 3 closed USER CONFIGURABLE SETTINGS(CONTINUED) Function Location Setting » IDE(AT) interface address is JP6/4 pins 2 & 3 closed 1F0h IDE(AT) interface address is JP6/4 pins 1 & 2 closed 170h » Floppy drive interface JP6/5 pins 1 & 2 closed enabled Floppy drive interface JP6/5 pins 2 & 3 closed disabled » Game port enabled JP16 closed Game port disabled JP16 open » Factory configured - do not JP17 N/A alter » Factory configured - do not JP18 N/A alter » Hard drive interrupt IRQ14 JP19 pins 1 & 2 closed select Hard drive interrupt IRQ15 JP19 pins 2 & 3 closed select » Factory configured - do not JP20 N/A alter » Factory configured - do not JP24 N/A alter » Factory configured - do not JP25 N/A alter SERIAL PORT 1 CONFIGURATION Port 1 JP9/1 JP9/2 » COM1 pins 1 & 2 closed pins 2 & 3 closed COM3 pins 2 & 3 closed pins 1 & 2 closed Disabled pins 2 & 3 closed pins 2 & 3 closed SERIAL PORT 2 CONFIGURATION Port 2 JP9/3 JP9/4 » COM2 pins 1 & 2 closed pins 2 & 3 closed COM4 pins 2 & 3 closed pins 1 & 2 closed Disabled pins 2 & 3 closed pins 2 & 3 closed PARALLEL PORT CONFIGURATION LPT JP9/5 JP9/6 » 1 (378h) pins 2 & 3 closed pins 1 & 2 closed 2 (278h) pins 1 & 2 closed pins 2 & 3 closed 3 ( BCh) pins 1 & 2 closed pins 1 & 2 closed SERIAL PORT 1 INTERRUPT SELECTION IRQ JP12/1 JP12/2 JP12/3 » IRQ4 closed open open IRQ3 open closed open IRQ5 open open closed SERIAL PORT 2 INTERRUPT SELECTION IRQ JP12/4 JP12/5 JP12/6 » IRQ3 closed open open IRQ4 open closed open IRQ5 open open closed PARALLEL PORT INTERRUPT SELECTION IRQ JP12/7 JP12/8 » 7 closed open » 5 open closed