ADAPTEC, INC. AHA-2840VL, AHA-2842VL Data bus: 32-bit VL-Bus Size: Full-lengh, full-height card Hard drive supported: Up to seven SCSI devices Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB drives [Image] CONNECTIONS Function Location 4-pin connector - drive active LED J1 34-pin floppy drive connector J2 50-pin SCSI connector - internal J3 50-pin SCSI connector - external J4 USER CONFIGURABLE SETTINGS Function Location Setting » Floppy drive enabled S1/switch 5 off Floppy drive disabled S1/switch 5 on » Host adapter BIOS enabled S1/switch 8 off Host adapter BIOS disabled S1/switch 8 on Note: Disabling the host adapter BIOS for non-disk devices such as CD-ROM drives, tape drives, will reduce boot up time. I/O ADDRESS SELECTION Address S1/Switch 1 S1/Switch 2 S1/Switch 3 S1/Switch 4 » 1C000h off off off off 2C000h on off off off 3C000h off on off off 4C000h on on off off 5C000h off off on off 6C000h on off on off 7C000h off on on off 8C000h on on on off 9C000h off off off on AC000h on off off on BC000h off on off on CC000h on on off on DC000h off off on on EC000h on off on on Reserved off on on on Reserved on on on on BASE ADDRESS SELECTION Address S1/Switch 6 S1/Switch 7 D8000h off off C8000h on off D0000h off on E0000h on on MISCELLANEOUS TECHNICAL NOTES Only single-ended SCSI devices can be connected to the AHA-2840VL/2842VL.