DATA TECHNOLOGY CORPORATION

DTC-2130D (900158-89A)

  Data bus:                  32-bit PCI

  Size:                      Half-length, half-height card

  Hard drive supported:      Four IDE(AT) interface drives

  Floppy drives supported:   None

[Image]

                                CONNECTIONS

                    Function                             Location

  DTC-1415 ISA B Interrupt adapter connector                J1

  4-pin connector - drive active LED                        J2

  40-pin connector - primary IDE(AT) interface              J3

  40-pin connector - secondary IDE(AT)                      J4
  interface

  Note: Connector J1 is intended for use in systems that do not support
  redirected PCI interrupts.

                        USER CONFIGURABLE SETTINGS

                 Function                   Location        Setting

  Primary port (IRQ14) INTA select             W1      pins 1 & 3 closed

  Primary port (IRQ14) INTB select             W1      pins 2 & 4 closed

  Primary port (IRQ14) INTC select             W1      pins 3 & 5 closed

  Primary port (IRQ14) INTD select             W1      pins 4 & 6 closed

  Secondary port (IRQ15) INTA select           W2      pins 1 & 3 closed

  Secondary port (IRQ15) INTB select           W2      pins 2 & 4 closed

  Secondary port (IRQ15) INTC select           W2      pins 3 & 5 closed

  Secondary port (IRQ15) INTD select           W2      pins 4 & 6 closed