UNIDENTIFIED SP-160 Data bus: 16-bit, ISA Size: Half-length, full-height card Hard drive supported: Two IDE (AT) Interface drives and up to seven SCSI devices Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB drives [Image] CONNECTIONS Function Location Game port CN1 25-pin parallel port CN2 10-pin serial port 1 CN3 10-pin serial port 2 CN4 40-pin IDE (AT) interface connector CN5 34-pin control cable connector - floppy drive CN6 50-pin SCSI connector - internal CN7 50-pin SCSI connector - external CN8 4-pin connector - drive active LED (IDE) CN9 4-pin connector - drive active LED (SCSI) CN10 USER CONFIGURABLE SETTINGS Function Location Setting » Floppy drive enabled JP1 pins 1 & 2 closed Floppy drive disabled JP1 pins 3 & 4 closed » Factory configured - do not JP4 n/a alter » AHA-1520 driver compatibility JP7/jumper A open enabled 6360 compatibility enabled JP7/jumper A closed » Factory configured - do not JP7/jumper B n/a alter USER CONFIGURABLE SETTINGS Function Location Setting » Disconnect/reselect enabled JP7/jumper C closed Disconnect/reselect disabled JP7/jumper C open » Synchronous negotiation enabled JP7/jumper D closed Synchronous negotiation disabled JP7/jumper D open » Boot-up with INT19 enabled JP7/jumper E closed Boot-up with INT19 disabled JP7/jumper E open » Factory configured - do not JP7/jumper F n/a alter » Factory configured - do not JP7/jumper G n/a alter » Factory configured - do not JP7/jumper H n/a alter » SCSI parity enabled JP9/jumper D open SCSI parity disabled JP9/jumper D closed » SCSI address = 340h JP10 open SCSI address = 140h JP10 closed » Factory configured - do not W1 n/a alter » Factory configured - do not W2 n/a alter » Factory configured - do not W3 n/a alter IDE PORT CONFIGURATION Address JP2 JP3 » Primary pins 1 & 2 closed pins 1 & 2 closed Secondary pins 1 & 2 closed pins 2 & 3 closed Disabled pins 2 & 3 closed all pins open SCSI INTERRUPT SELECT IRQ JP6/A JP6/B JP6/C JP6/D RN19 RN20 RN21 RN22 » 11 open open closed open not installed not not installed installed installed 9 closed open open open not not not installed installed installed installed 10 open closed open open not not installed not installed installed installed 12 open open open closed installed not not not installed installed installed Note:RN19-RN22 are four-pin resistors. BIOS ADDRESS - JP8 Address Jumper A Jumper B Jumper C » D8000h closed closed closed C8000h open closed closed CC000h closed open open D0000h closed open closed D4000h closed closed open Disabled open open closed SCSI ID - JP9 ID# Jumper A Jumper B Jumper C » ID7 closed closed closed ID0 open open open ID1 closed open open ID2 open closed open ID3 closed closed open ID4 open open closed ID5 closed open closed ID6 open closed closed SCSI ID IRQ JP6/A JP6/B JP6/C JP6/D RN19 RN20 RN21 RN22 » IRQ11 open open closed open not installed not not installed installed installed IRQ9 closed open open open not not not installed installed installed installed IRQ10 open closed open open not not installed not installed installed installed IRQ12 open open open closed installed not not not installed installed installed PARALLEL PORT CONFIGURATION LPT/Address RN2 RN3 RN4 » LPT2/378h installed not installed not installed LPT3/278h not installed installed not installed Disabled not installed not installed installed Note:RN2-RN4 are four-pin resistors. SERIAL PORT 1 CONFIGURATION COM/Address RN8 RN9 RN10 » COM1/3F8h installed not installed not installed COM3/3E8h not installed installed not installed Disabled not installed not installed installed Note:RN8-RN10 are four-pin resistors. SERIAL PORT 2 CONFIGURATION COM/Address RN5 RN6 RN7 » COM2/2F8h installed not installed not installed COM4/2E8h not installed installed not installed Disabled not installed not installed installed Note:RN5-RN7 are four-pin resistors.