UNIDENTIFIED

AB-862 PLUS

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE (AT) interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                    Function                           Location

  Game port                                               CN1

  40-pin IDE (AT) Interface connector                     CN2

  34-pin control cable connector - floppy drive           CN3

  10-pin serial port 2 -internal                          CN4

  9-pin serial port 1 - external                          CN5

  25-pin parallel port                                    CN6

  2-pin connector - drive active LED                      JP1

  IOCHRDY signal connector                                JP9

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   Serial port 1 enabled                  JP2             pins 1 & 2
                                                              closed

      Serial port 1 disabled                 JP2             pins 2 & 3
                                                              closed

  »   Game port enabled                      JP3             pins 1 & 2
                                                              closed

      Game port disabled                     JP3             pins 2 & 3
                                                              closed

  »   Floppy drive enabled                   JP4             pins 1 & 2
                                                              closed

      Floppy drive disabled                  JP4             pins 2 & 3
                                                              closed

  »   Parallel port address = 378h           JP5             pins 1 & 2
                                                              closed

      Parallel port address = 278h           JP5             pins 2 & 3
                                                              closed

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

  »   IDE port enabled                        JP6            pins 1 & 2
                                                              closed

      IDE port disabled                       JP6            pins 2 & 3
                                                              closed

      Serial port 2 enabled                   JP7            pins 1 & 2
                                                              closed

      Serial port 2 disabled                  JP7            pins 2 & 3
                                                              closed

  »   Hard drive installed (enabled)          JP8            pins 1 & 2
                                                              closed

      Hard drive not installed                JP8            pins 2 & 3
      (disabled)                                              closed