MORSE TECHNOLOGIES, INC.

KP 2000

  Data bus:                  16-bit, ISA

  Size:                      Full-length, full-height card

  Hard drive supported:      Two MFM ST506/412 drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                    Function                           Location

  4-pin connector - drive active LED                      J1

  20-pin data cable connector - drive 2                   J2

  20-pin data cable connector - drive 1                   J3

  34-pin control cable connector - hard drive             J4

  34-pin control cable connector - floppy drive           J5

                        USER CONFIGURABLE SETTINGS

                Function                     Location         Setting

  »   AT-type 3.50in floppy drive               JP2          pins 1 & 2
      installed                                                closed

      PS/2-type 3.50in floppy drive             JP2          pins 2 & 3
      installed                                                closed

  »   Single speed floppy drive                 JP5             open
      selected

      Dual speed floppy drive selected          JP5            closed

  »   HDD Write Precompensation = 125ns         JP6             open

      HDD Write Precompensation = 187ns         JP6            closed

  »   HDD address = 1F0h                        JP7          pins 1 & 2
                                                               closed

      HDD address = 170h                        JP7          pins 2 & 3
                                                               closed

  »   Floppy drive address = 3F2,               JP8          pins 1 & 2
      3F4-3F7h                                                 closed

      Floppy drive address = 372,               JP8          pins 2 & 3
      374-377h                                                 closed

                               FLOPPY DRIVE

           Setting                     JP3                   JP4

  »          Enabled                 closed                  open

             Disabled                 open                  closed

                           FLOPPY DRIVE OPTIONS

          Drive A                   Drive B                  JP1

  »          5.25in                  None             pins 1 & 2 closed

             5.25in                 5.25in            pins 1 & 2 closed

             5.25in                 3.50in            pins 2 & 3 closed

             3.50in                 3.50in            pins 2 & 3 closed

             3.50in                  None             pins 2 & 3 closed