FIRST INTERNATIONAL COMPUTER, INC.

MIO-V (16-BIT VERSION)

  Data bus:                  16-bit, ISA

  Size:                      Half-length, half-height card

  Hard drive supported:      Two IDE (AT) interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                    Function                           Location

  4-pin connector - drive active LED                      JP1

  40-pin IDE (AT) Interface connector                     JP2

  34-pin control cable connector - floppy drive           JP3

  Game port                                               JP8

  10-pin serial port 2                                    JP9

  10-pin serial port 1                                   JP10

  25-pin parallel port                                   JP11

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

  »   Floppy drive enabled                   JP17            pins 1 & 2
                                                              closed

      Floppy drive disabled                  JP17            pins 2 & 3
                                                              closed

                                 IDE PORT

           Setting                      JP4                   JP5

  »           Enabled                  closed                 open

             Disabled                   open                  open

                     SERIAL PORTS 1 & 2 CONFIGURATION

       Port 1            Port 2             JP6                JP7

  »       COM1            COM2           pins 1 & 2         pins 1 & 2
                                           closed             closed

          COM3            COM4           pins 1 & 2         pins 2 & 3
                                           closed             closed

          COM1            COM4           pins 2 & 3         pins 1 & 2
                                           closed             closed

          COM2            COM3           pins 2 & 3         pins 2 & 3
                                           closed             closed

                        PARALLEL PORT CONFIGURATION

             LPT                      JP12                   JP13

  »           LPT1             pins 1 & 2 closed      pins 2 & 3 closed

              LPT2             pins 1 & 2 closed      pins 1 & 2 closed

              LPT3             pins 2 & 3 closed      pins 1 & 2 closed

            Disabled           pins 2 & 3 closed      pins 2 & 3 closed