AMERICAN MEGATRENDS, INC.

FAST DISK EISA SCSI HOST ADAPTER

 Data bus:                  32-bit, EISA

 Size:                      Full-length, full-height card

 Hard drive supported:      Up to seven SCSI 2 devices

 Floppy drives supported:   Two 360KB, 720KB, 1.2MB or 1.44MB drives

[Image]

                              CONNECTIONS

                    Function                           Location

  50-pin SCSI 2 connector - internal                      P1

  34-pin control cable connector - floppy drive           P2

  50-pin SCSI 2 connector - external                      P3

  4-pin connector - drive active LED                      J1

                        USER CONFIGURABLE SETTINGS

               Function
                                           Location
                                                             Setting

  »
      Floppy drive enabled
                                            SW1/1
                                                                on


      Floppy drive disabled
                                            SW1/1
                                                               off

  »
      Factory configured - do not
      alter
                                            SW1/2
                                                               off

  »
      Factory configured - do not
      alter
                                              J2
                                                            pins 1 & 2
                                                              closed

                            CACHE CONFIGURATION

         Size                    Bank 0                   Bank 1

          1MB              (2) 256K x 9 SIMMs       (2) 256K x 9 SIMMs

          4MB              (2) 1MB x 9 SIMMs         (2) 1MB x 9 SIMMs

         16MB              (2) 4MB x 9 SIMMs         (2) 4MB x 9 SIMMs

  Note:All banks must be populated with 70ns SIMMs or the adapter will
  not operate.