UNIDENTIFIED

PM-510-C

                                   Q1/95

  Data bus:                  16-bit, ISA

  Size:                      Half-length, half-height card

  Hard drive supported:      Two IDE (AT) interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                    Function                           Location

  4-pin connector - drive active LED                      CN1

  40-pin IDE (AT) Interface connector                     CN2

  34-pin control cable connector - floppy drive           CN3

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

  »   Floppy drive enabled                    J1             Pins 1 & 2
                                                              closed

      Floppy drive disabled                   J1             Pins 2 & 3
                                                              closed

  »   HDD enabled                             J2             Pins 1 & 2
                                                              closed

      HDD disabled                            J2             Pins 2 & 3
                                                              closed

  »   Standard I/O check ready signal         J3             Pins 1 & 2
                                                              closed

      Delayed I/O check ready signal          j3             Pins 2 & 3
                                                              closed