TEKRAM TECHNOLOGY COMPANY, LTD. DC - 880B Q3/95 Data bus: 32-bit VL-Bus Size: Full-length, half-height card Hard drive supported: Up to seven SCSI drives Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB, or 2.88MB drives [Image] CONNECTIONS Function Location 50-pin SCSI connector - external CN1 50-pin SCSI connector - internal CN2 34-pin cable connector - floppy drive CN3 2-pin connector - drive active LED JP1 4-pin connector - speaker JP2 USER CONFIGURABLE SETTINGS Function Location Setting » Floppy drive enabled JP3/jumper 1 closed » Floppy drive disabled JP3/jumper 1 open » Factory configured - do not JP3/jumper 5 open alter BASE I/O ADDRESS Address JP3/jumper 2 JP3/jumper 3 JP3/jumper 4 » 330h closed closed closed » 130h open open closed » 134h open open open » 230h open closed closed » 234h open closed open » 334h closed open closed CACHE MEMORY CONFIGURATION Size Bank 0 Bank 1 512KB (2) 256K x 9 NONE 1MB (2) 256K x 9 (2) 256K x 9 2MB (2) 1M x 9 NONE 2.5MB (2) 1MB x 9 (2) 256K x 9 4MB (2) 1MB x 9 (2) 1MB x 9 8MB (2) 4MB x 9 NONE 8.5MB (2) 4MB x 9 (2) 256K x 9 10MB (2) 4MB x 9 (2) 1MB x 9 16MB (2) 4MB x 9 (2) 4MB x 9 Note: Bank 0 must be installed while SIMM’s can be mixed in any combination not exceeding 16MB.