TMC RESEARCH CORPORATION

CP326, CP328 (VER. 1.0)

  Data bus:                32-bit, VL-Bus

  Size:                    Three/quarter-length, full-height card

  Hard drive supported:    Two IDE (AT) interface drives

  Floppy drives            Two 360KB, 720KB, 1.2MB, or 1.44MB drives
  supported:

[Image]

                              CONNECTIONS

                    Function                           Location

  4-pin connector - drive active LED                      J1

  40-pin IDE(AT) interface connector                      J2

  26-pin feature connector                                J3

  34-pin control cable connector - floppy drive           J4

  16-pin game port - internal                             J5

  10-pin serial port 2 - internal                         J6

  10-pin serial port 1 - internal                         J7

  15-pin VGA connector - external                         J8

  25-pin parallel port - external                         J9

                        USER CONFIGURABLE SETTINGS

             Function                    Location            Setting

  IDE speed is 0 (lowest)            JP2/pins 1 & 2, 4        closed
                                            & 5

  IDE speed is 1 (average)           JP2/pins 2 & 3, 4        closed
                                            & 5

  IDE speed is 2 (highest)           JP2/pins 2 & 3, 5        closed
                                            & 6

  Parallel port enabled               JP7/pins 1 & 2          closed

  Parallel port disabled              JP7/pins 2 & 3          closed

  Floppy controller enabled           JP9/pins 1 & 2          closed

  Floppy controller disabled          JP9/pins 2 & 3          closed

  Parallel port is LPT2               JP10/pins 1 & 2         closed

  Parallel port is LPT3               JP10/pins 2 & 3         closed

  Game port enabled                  JP11/ pins 1 & 2         closed

  Game port disabled                 JP11/ pins 2 & 3         closed

                 SERIAL PORT 1 CONFIGURATION

         COM                 JP5                  JP6

        COM1           pins 1 & 2 closed   pins 1 & 2 closed

        COM3           pins 2 & 3 closed   pins 1 & 2 closed

      Disabled               N/A           pins 2 & 3 closed

                 SERIAL PORT 2 CONFIGURATION

         COM                 JP3                  JP4

        COM2           pins 1 & 2 closed   pins 1 & 2 closed

        COM4           pins 2 & 3 closed   pins 1 & 2 closed

      Disabled               N/A           pins 2 & 3 closed

                      DRAM CONFIGURATION

        Size               Bank 0/1             Bank 0/1

         2MB             (8) 256K x 4         (2) 512K x 8

  Note: The orientation of the memory banks is unidentified.