UNIDENTIFIED

VLS-6360

Data Bus:                VESA local bus
Size:                    Mid-length, full-height card
Hard drives supported:   SCSI up to 7 drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                         CONNECTIONS

                  Function                      Location

  50-pin SCSI External port                        CN1

  50-pin SCSI internal port                        CN2

  34-pin data cable connector-floppy drive         CN3

  4-pin connector-drive active LED                 CN4

  Terminating Resistor 1                           RN1

  Terminating Resistor 2                           RN2

  Terminating Resistor 3                           RN3

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

  »   Port Address 340h                      SW1/1              on

      Port Address 140h                      SW1/1              off

  »   BIOS enabled                           SW1/2              on

      BIOS disabled                          SW1/2              off

                        USER CONFIGURABLE SETTINGS

                Function                     Location         Setting

  »    BIOS support for Floptical/SCSI         SW1/7            off
       floppy disabled

       BIOS support for Floptical/SCSI         SW1/7             on
       floppy enable

  »    6360 Feature Bit disabled               SW1/8            off

       6360 Feature Bit enabled                SW1/8             on

  »    Negotiation enabled                     SW1/9             on

       Negotiation disabled                    SW1/9            off

  »    Disconnect enabled                     SW1/10             on

       Disconnect disabled                    SW1/10            off

  »    Floppy drive enabled                     JP5            closed

       Floppy drive disabled                    JP5             open

  »    Standard SCSI drive type                 JP8             open

       Hard drive >1Gb or Floptical             JP8            closed

       Note 1: SW1/7 & SW1/8 have no meaning under BIOS version 1.01L

                 2:A later version of the BIOS will support the SW1/7 &
                 SW1/8 option. If SW1/7 is set to (On) and the BIOS is
                 later than 1.01L then SW1/8 must be set to (On) for the
                 SW1/7 option to work.

                         BIOS PORT ADDRESS SETTING

              Setting                      SW1/3              SW1/4

  »              DC000h                     on                  on

                 D8000h                     off                 on

                 CC000h                     on                 off

                 C8000h                     off                off

                             INTERRUPT SELECT

   Setting      JP4/A     JP4/B      JP4/C     JP4/D     SW1/5     SW1/6

  »   IRQ11     open       open     closed      open      off       on

       IRQ9    closed      open      open       open      off       off

      IRQ10     open      closed     open       open      on        off

      IRQ12     open       open      open      closed     on        on