ADVANCED DIGITAL INFORMATION CORPORATION

BUSMASTER FAST-SCSI DCB-EISA

 Data bus:                  32-bit, EISA

 Size:                      Full-length, full-height card

 Hard drive supported:      Up to seven SCSI devices

 Floppy drives supported:   Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB
                            drives

[Image]

                              CONNECTIONS

                    Function                           Location

  4-pin-connector - drive active LED                      J1

  34-pin control cable connector - floppy drive           J2

  50-pin SCSI connector - internal                        J3

  50-pin SCSI connector - external                        J4

                                       USER CONFIGURABLE SETTINGS

                        Function
                                                                Location
                                                                                        Setting

  »
      Floppy drive enabled
                                                                   W8
                                                                                         closed


      Floppy drive disabled
                                                                   W8
                                                                                          open


      Floppy drive enabled
                                                                   J3
                                                                                  pins 41 & 42 closed


      Floppy drive disabled
                                                                   J3
                                                                                   pins 41 & 42 open


      Note (1):The floppy drive controller can be enabled any one of three ways:

      (a) close jumper W8, or

      (b) close pins 41 & 42 of connector J3, or

      (c) select the floppy disk controller enabled option in the EISA configuration file.

      Note (2):To disable the floppy disk controller, all three of the above options must be disabled:

      (a) open jumper W8, and

      (b) open pins 41 & 42 of connector J3, and

      (c) select the floppy disk controller disabled option in the EISA configuration file.