PROMISE TECHNOLOGY, INC.

DC4030VL-2 (REV.2)

  Data bus:                32-bit, VL-bus

  Size:                    Three/quarter-length, full-height card

  Hard drive supported:    Four IDE (AT) interface drives

  Floppy drives            Four 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB
  supported:               drives

[Image]

                                CONNECTIONS

                    Function                             Location

  40-pin IDE (AT) Interface connector - IDE 0,              J1
  1

  40-pin IDE (AT) Interface connector - IDE 2,              J2
  3

  34-pin control cable connector - floppy                   J3
  drive - Floppy 0, 1

  34-pin control cable connector - floppy                   J4
  drive - Floppy 2, 3

  4-pin connector - drive active LED                       JP1

                        USER CONFIGURABLE SETTINGS

               Function                     Location          Setting

  »   Factory configured - do not             JP2            pins 2 & 3
      alter                                                    closed

  »   Floppy drive enabled                    JP3            pins 1 & 2
                                                               closed

      Floppy drive disabled                   JP3            pins 2 & 3
                                                               closed

                       MISCELLANEOUS TECHNICAL NOTES

   At least one pair of SIMMs of equal memory size (256KB, 1MB or 4MB of
     70ns or faster) must be installed in Bank 0 for the DC4030VL-2 to
                                 function.